Clickfine AutoProtect - Enjoy prevention
- Innovative locking mechanism for protection against needle stick injuries
- Cannula hidden by blue protection cap for more confidence
- Special silicone surface treatment for advanced injection comfort
- Compatible with all major injection pen brands1, available in 5 mm and 8 mm lengths
1 See the list of compatible pens on the Clickfine AutoProtect pen needle box or pen compatibility.
Clickfine AutoProtect Enjoy prevention
Life already has enough risks
Every year, millions of people around the world injure themselves with used needles. Especially medical and health care professionals run the risk of injuring themselves with used needles. This risk of contamination can be easily prevented: with the Clickfine AutoProtect pen needle from Ypsomed.
We care about your safety
With its innovative and patented locking system, Clickfine AutoProtect minimises the risk of needle stick injuries.
The Clickfine AutoProtect safety pen needle ensures following characteristics:
- Contains a fully integrated safety needle mechanism
- Automatically locks immediately after injection
- Red lock indicator clearly shows locked stage
- Visible cannula tip facilitates priming
- Lock permanently covers needle preventing repeated use
Premium quality features Experience reliable comfort
Easy Flux
Top quality medical cannula with thin wall technology enables easy and optimal flux of medication because of its larger inner diameter.
Easy Glide
Special silicone surface treatment enables constant gliding characteristics and smooth penetration.
Reliable safety and simplicity
Clickfine AutoProtect with protective cap
Before injection: cannula protected by protective sleeve
During injection: protective sleeve releases needle
After injection: automatic locking and red locking indicator
Clickfine AutoProtect Handling steps
How to use the safety pen needle
Remove tab.
Keep straight when attaching. Do not angle.
Click (push) needle onto pen.
Screw to secure needle.
Pull off protective cap and discard.
Before Injection, follow pen instruction for priming test.
Check if liquid comes out of needle tip.
Set dose on injection pen.
Position at an approximately 90° angle to chosen injection site. Injection is possible with or without a skin fold.
Insert the needle gently until blue needle shield is no longer visible. Hold during injection.
Inject slowly and hold in accordance with pen instruction.
Remove/withdraw from injection site. Keeping it straight.
Unscrew needle. The blue needle shield locks automatically and the red locking indicator is visible.
Dispose of needle in accordance with local regulations.
Clickfine AutoProtect Needle lengths
Types and product range
The Clickfine AutoProtect pen needle is available in two different lengths: 5 mm and 8 mm. The 5 mm needle may be used without a skin fold technique minimising the risk of an accidential needle stick to caregivers during injection2.
| Pen needle | Cannula diameter | Cannula length |
|---|---|---|
| Clickfine Autoprotect 5 mm | 31G / 0.25 mm | 5 mm |
| Clickfine Autoprotect 8 mm | 29G / 0.33 mm | 8 mm |
2 K. Strauss and WISE Consensus Group: WISE recommendations to ensure the safety of injections in diabetes. Diabetes & Metabolism. 2012, 38, S2–S8, Supplement 1.
Pen compatibility
Clickfine AutoProtect pen needles are tested according to ISO 11608-2:2012; they are fully functional and provide better safety when used with the injection pens listed below and on the Clickfine AutoProtect pen needle box.
Fits on:
Diabetes pens
Humalog® Mix 50/50 KwikPen®
Humalog® Mix 75/25 KwikPen®
Humulin 70/30® KwikPen®
NovoLog® FlexPen®
NovoLog® Mix 70/30 FlexPen®
Some injection pens may not be available in all countries. If in doubt please contact the injection pen manufacturer. Follow the instructions for use of your injection pen before using a Clickfine AutoProtect pen needle.
